IN FOCUS TECHNOLOGIES inc.

Buzzers

 

Home
Up

MODEL: PZ-M

 

Remote piezo buzzer

Low cost - Loud output pz-m.jpg (5013 bytes)

Powered by host VNT-DX / DPX-M

3M Dual Lock™ type mounting

"In use" Lamp

 

Product Description

The PZ-M is a low cost remote buzzer for extending audible alarms into the corridor or to a central location. The device emits a loud continuous or pulsing tone (internally set) and has a 24 volt lamp to indicate alarm status.

The PZ-M is powered by a host VNT-DX, DPX-M time delay controller and is connected with plug ended cables. It is light enough (4 oz.) to be "3M Dual Lock™'d" to a ceiling grid, door frame, corridor light or wall.

When used in combination with a MIC-M noise sensor , DPX-M time delay controller, and 40' cable , a portable alarm extension and enhancement system can be utilized.

 

SPECIFICATIONS

Power : 24 volts D.C. @ 150 ma.

Input : 24 volts D.C. supplied by host VNT-DX / DPX-M.

Output : 82 - 100 db @ 2800 hz., 24 volt lamp indicator

Housing : Light gray ABS plastic.

Installation : 3M Dual Lock™ type tapes for easy mounting to smooth surfaces. 40' plug ended cable available for connection to host DPX-M,VNT-DX

Dimensions : 1 1/2" high, 2 1/4" deep, 3 1/2" wide.